Central Workshop     

Pressure Vessels

Major Clients: GASCO, APRCO, NPC, UGDC,
                           QPC, KPC, EGPC, GUPCO

Scope of Work: Design, Procurement,
                              Fabrication & Testing

Material: C.S, St. St., Cladded,
                  Alloy & Duplex Material

Weight: 330 Ton

Dimension: D: 6.6 m L: 42 m Thk. : 
                      120mm

Pressure: 375 bar

Total No. 400

Back

 

 

---

Heat Exchangers

Major Clients: ASORC, NPC, APRCO, KPC, GPC, GUPCO, UGDC, & SOPC

Equipment Types: Heat Exchanger, Water Cooler, Condensers & Heaters.

Code: ASME, TEMAR

Scope of Work: Design, Procurement, Fab. & Testing

Material: C.S, St.St., Cu /Ni Alloy

Types: Shell & Tubes

No. Of Tubes: 1500

Weight: 76 Ton

Dimension: D:2.7 m L:14 m Shell Thk:74mm

Tube Sheet: Thk. 200 mm

Total No. 295

Back

 

 

---

Desalination Units

Clients & Location: B. Hitachi KIKI [Sidi Krir , Ayoun Mousa Power Plants], GPC [Ras Gharib]

Scope Of Work: Fabrication & Testing

Fabrication Period: 6 Months / Unit

Material: C.S, St.St. & Alloy steel

Dimension: 7 x 20 ml / Unit

No. of units & Wt.: 5 Evaporators (430 Ton/Evaporator)
                                  5 Brine Heaters (56 Ton)
                                 10 Chemical Skids (100 Ton)

No. Of Tubes : 42000 Tubes / Evaporator

Capacity : 5100 m³ /Day

Total No. 5 Units

Back

 

 

 

---

Columns

Major Clients: GASCO, APRCO, NPC, QPC, KPC, EGPC, UGDC

Scope Of Work: Design, Procurement, Fabrication ,
                               Heat Treatment, Testing & Transportation

Material: C.S, St.St., Alloyed & Claded Steel

Weight: 330 Ton

Dimension: D : 5.8 m

                       L: 45 m

                       Thk.: 96 mm

Pressure: 80 Bar

Total No. 37

Back

 

 

 

---

Air Coolers

Major Clients: GASCO, EGPC, NPC & QPC

Scope of Work: Design, Procurement, Fabrication & Testing

Material: C.S & Alloy Mat.

Dimension: 14 x 5.5 x 4.2 m

No. of Tubes: 3600 Tubes / unit

Weight: Up to 160 Ton / unit

Total No. 61

Back

 

 

 

---

 

Skid-Mounted Packages

Major Clients: EGPC, QPC, GUPCO, APRCO, RASHPETCO,
                           WEPCO & AGIBA

Service: Prod. & Test Separators, Manifolds, L/R Pig Traps
                & Fuel Gas Conditioning

Scope of Work: Design, Procurement, Fabrication, & Testing

Dimension: 15 x 6 x 6.5m

Weight: 220 Ton

Material: C.S, St.St., Claded & Duplex

Total No. 148

Back

 

 

---

 

Crude Oil Fired Heaters

Major Client: NPC, APRCO & SOPC

Scope of work: Procurement, Fabrication & Assembly

Weight: 710 Ton / Heater

Thermal capacity: 38.6 MM Cal / hr

Heater Types: Double Cabinet, Air Re-cycle & Cylindrical Type

Material: Alloy Material for Coils C.S Material for Others

Total No. 9

Back

 

 

 

---

Slug Catcher

Clients: Petrobel (Temsah) / GUPCO (Ha’py)

Scope of Works & Specification: Design, Procurement, Fabrication,
                                                              Heat Treatment / Testing

Item Description: - Liquid / Gas Inlet Header (Wt.= 83tons, Pipe 42” thk
                                                                                 75mm)
                                 - Gas outlet header (52 Tons)
                                 - Drain header (28 ton- pipes 42”/75mm)
                                 - 3 Piping Skid (0303-XY-001,2,3)
                                 - No. of Fingers 6 (42” - th. 46mm- L=200 ml.)
                                 - Supervising and Assist the site Erection works &
                                         Inspection

Total No. 4

Back

 

 

 

---

 

Separation & Metering Package
 
Client: Binz Oil / Fanpetco

Fabrication Period: Oct., 2000 -- Dec., 2000

Scope Of Works: Design / Engineering (En-Fab as a Sub-Contractor) Material Procurement, Complete Fabrication for 3
Phase separators and all packages, Function Test / Packing, and Transportation to Ras Shokeir

Total Weight: 52 Ton

Max Dimension: L=21m & W=4.2m & H=8ml

Total No. 1.

Back

 

 

---

 

Heat Exchangers site Repair & Re-Tubing
R/B GPC Oil Treatment Plant

Clients: ENPPI / G. P. C.

Service: Disassembly for 6 Heat Exchangers & shill Site Repair
                & Bundles Re-Tubing & Tube Sheet and Baffles Machining / Site Assembly and Testing

No. Of Tube: 5600 Tubes

Testing: 29 Bar

Inspection: NBIC [R-Stamp]

Total No. 14

 

 

---

Fabrication of Oil Field Pumping Units

Cooperation Agreement between PETROJET, a regional leader in manufacturing all types of onshore/offshore equipment And Lufkin Industries, world recognized name in the supply of Oil Field Pumping Units.

 

PETROJET fabricates a variety of pumps components like Pitman Arm, Samson Post, Horse Head, Walking Beam, …etc.

 

Fabrication is done at PETROJET Central Fabrication Facility at Kattameia, with plans for utilizing the capabilities of Idku & Maadeia Workshops as well.

 

 

 

 

 

 

Back